Advertisement
Connect Diagnostics Cable to Cradle
STEP FOUR
Plug the canbus cable that you removed from the LMU in an earlier step, into the 16 pin port on
the 3640 LMU (the only open port).
STEP FIVE
(If not already pre-assembled) Connect the 6 pin plug (smaller of the two plugs) from the LMU
assembly into the matching port on the back of the cradle.
PedigreeTechnologies.com | Support: (701)-499-0022
Cab-Mate Connect to Cab-Mate Flex
16 Pin Connector
from canbus cable
6
Advertisement
