Advertisement
Answering Phone Calls -
Single incoming call. The phone rings, the corresponding LINE key will flash in red.
1. Answer call by taking handset off hook, or using Speaker/Headset, or pressing the flashing LINE key.
Multiple incoming calls. If another call comes in while on an active call, the phone will produce a Call Waiting tone
(stutter tone). The other LINE key will flash in red.
1. Answer the incoming call (and automatically put the current call on hold) by pressing the flashing LINE key.
Answering Phone Calls -
Do Not Disturb can be enabled/disabled from phone's Keypad Menu by following these steps:
1. Press the MENU key and select "Preference" using navigation keys.
2. Press MENU key a second time to get into Preference options.
3. Select "Do Not Disturb" and press MENU key.
4. Use arrow keys to select and press MENU key to enable or disable "Do Not Disturb" feature.
NOTE: When Do Not Disturb feature is turned on, the DND icon
incoming calls will not be accepted.
Reject -
Reject the incoming call by pressing the "Reject" softkey when the phone is ringing.
Actions During A Phone Call
Hold. Place a call on hold by pressing the HOLD key..
Resume. Resume the call by pressing the blinking LINE key.
Mute
Press the MUTE key
on the screen when the call is muted.
Call Transfer
1. During the first active call, press TRANSFER key
2. Press SEND key
Conferencing
Start a conference call.
1. Establish calls with 2 parties respectively.
2. While 1 call is active, the other call/calls will be put on hold with its LINE key blinking in green.
3. Press CONFERENCE key
Cancel Conference.
1. If after pressing the CONFERENCE key, the user decides not to conference, press the Cancel soft key or the current
active LINE key (LED in solid green);
2. This will resume the 2-way conversation with the current line.
End Conference.
Press the "EndCall" softkey or simply hang up the call to terminate the conference call.
Easy Conference Mode
1. Make the first call.
2. Press CONFERENCE key and a new line will be brought up using the same account.
3. Dial the number and press SEND key to establish the second call.
4. Press CONFERENCE key a second time or press the "ConfCall" softkey to establish the conference.
Cancel Conference.
1. If users decide not to conference after establishing the second call, press EndCall softkey instead of the "ConfCall"
softkey/CONFERENCE key This will end the second call and the screen will show the first call on hold.
Receiving Calls
Do Not Disturb
-
Call Hold
to mute/unmute the microphone during an active call. The LCD will show the Mute icon
or # to complete transfer of the active call.
and press the desired LINE key on hold, the conference will be established.
will appear on the right side of the LCD and any
The active LINE key will blink in green.
and dial the number to transfer the active call.
Advertisement
