Download
Share
Print this page
  1. Manuals
  2. Brands
  3. NanaWall Manuals
  4. Folding Machines
  5. PrivaSEE
  6. Owner's manual

NanaWall PrivaSEE Owner's Manual

Single track sliding frameless system
Hide thumbs

Advertisement

Quick Links

Download this manual
Owner' s Manual
NanaWall PrivaSEE
Single Track Sliding Frameless System
This Owner's Manual contains instructions on the installation, operation, maintenance and warranty
of the NanaWall PrivaSEE Single Track Sliding Frameless System. This manual is to be used by the
installer for installation and is to be kept by the Owner for reference. Replacement parts can be ordered
directly through NanaWall Systems.
Nana Wall Systems, Inc.
100 Meadowcreek Drive #250
Corte Madera, CA 94925
800 873 5673
info@nanawall.com
nanawall.com
415 383 3148
Fax 415 383 0312
©2020 Nana Wall Systems, Inc.

Advertisement

loading

Related Manuals for NanaWall PrivaSEE

Summary of Contents for NanaWall PrivaSEE

  • Page 1 This Owner’s Manual contains instructions on the installation, operation, maintenance and warranty of the NanaWall PrivaSEE Single Track Sliding Frameless System. This manual is to be used by the installer for installation and is to be kept by the Owner for reference. Replacement parts can be ordered directly through NanaWall Systems.
  • Page 2 NANAWALL PRIVASEE OWNER’S MANUAL Installation Instructions Please pay special attention to the thickness of glass. The NanaWall glass thickness for the panels is based on the Glass Association of North America (GANA) The installation of the PrivaSEE System requires a...
  • Page 3 NANAWALL PRIVASEE OWNER’S MANUAL DIAGRAM 1: EXAMPLE OF A 3 PANEL UNIT (in this case shown from the inside looking out to show the locking hardware and floor closer) OU TS I D E I N S ID E Maximum Panel sizes and weights with glass thickness of...
  • Page 4 Please refer to the layout drawing of your particular installed on the side of the head track will be in the PrivaSEE project for the correct location of the support hardware box. structure (by others) for the support of the head track at the opening, stacking route and stacking bay.
  • Page 5 9. For better performance, it is strongly recommended As the PrivaSEE single track sliding system is a top- that all dead loads such as upper levels, etc. be hung system, it is essential that a proper substrate...

  • Page 6: Unit Installation

    Please pre-drill any additional The key to having a properly installed and anchorage holes as needed. operating PrivaSEE system is to install a perfectly plumb, level and square frame at The spacing of anchorage devices in the stacking bay the correct height from the level finish floor, should be every 4”...
  • Page 7 NANAWALL PRIVASEE OWNER’S MANUAL Use appropriate anchorage devices depending on the project lateral load requirements and adjacent substrate IMPORTANT: ADJUST EACH ANCHORAGE material and construction. If the factory pre-drilled holes POINT AS NEEDED TO MAKE THE UPPER TRACK are sufficient, then 5/16” (8 mm) diameter screws can ABSOLUTELY LEVEL AND PLUMB.
  • Page 8 NANAWALL PRIVASEE OWNER’S MANUAL IMPORTANT: anchoring point. Unscrew the bottom hinge from the side Make sure no shims are forced to ensure that the frame jamb. sections are not bowed. Check frame constantly to be Step B3 certain that it is level, plumb and square. A transit/laser...
  • Page 9 NANAWALL PRIVASEE OWNER’S MANUAL Step C1 D. GAPS AND ADJUSTMENT Check all the carriers on all the sliding panels. Step D1 Make sure all the set screws are loose. Do not make any After inserting all the sliding panels, slide them to the adjustments on the carriers, yet.
  • Page 10 NANAWALL PRIVASEE OWNER’S MANUAL After final adjustments make sure to tighten down the Step E4 set screw to secure the bolt/axle from turning. Slide the proper sockets into the holes. If necessary, use suitable material to fix them in place.

  • Page 11: Final Steps

    NANAWALL PRIVASEE OWNER’S MANUAL covers for the bottom and top hinges. See Sheet 11 of the slowly and check all the reveals. Make sure that the panel Installation Manual. Use suitable material to fix the floor is not binding or hitting the adjacent sliding panel.
  • Page 12 NanaWall certified installer as damage. During this phase, a unit is often subject to the soon as possible.
  • Page 13 Please have all problems corrected as soon as as vertical as possible and push into the stacking possible by a qualified technician or a NanaWall bay. Do not force. Avoid any pendulum movements, certified installer.

  • Page 14: Maintenance Checklist

    8. It is highly recommended that a maintenance/service Locking points should be gently opened and closed contract be entered with NanaWall certified installer, and not forced. Panels should be opened and who can clean and inspect on a periodic basis.
  • Page 15 Glass, with appropriate dimensions, thickness and specifications will be needed. Depending on the model, widths of all glass panels may not be equal. Ask NanaWall for the glass dimensions. Please note that glass is required to be safety glass – either fully tempered or laminated as specified for a particular order.
  • Page 16 Warranty, NanaWall shall respond in its sole discretion and in a timely manner as follows: Glass. NanaWall shall (1) ship a replacement glass unit to the location of original product delivery or (2) refund the original purchase price of the glass paid by NanaWall.
  • Page 17 Nana Wall Systems, Inc., 100 Meadowcreek Drive, Corte Madera, CA 94925, promptly when discovered. All rights under this Warranty will be waived if there is a failure to notify NanaWall within 30 days of receipt of the product for any defect which an ordinary inspection would reveal, or if there is failure to make a claim within a reasonable time during the warranty period after a hidden defect is discovered.
  • Page 18 Performance in the field may change over time depending upon the conditions of handling, installation, use, and maintenance. • Products or components not supplied by NanaWall; Products that have not been paid for in full; Products ordered in larger sizes or special configurations beyond NanaWall’s published specifications.
  • Page 19 NanaWall Warranty Registration Must be filled out and returned to the address printed at the bottom of this form within 30 days from date of purchase of the NanaWall in order for the limited warranty to become effective. ______________________________ ___________________________________...