Download
Share
Print this page
  1. Manuals
  2. Brands
  3. NanaWall Manuals
  4. Folding Machines
  5. SL45
  6. Owner's manual

NanaWall SL45 Owner's Manual

Aluminum framed top-hung folding system
Hide thumbs

Advertisement

Quick Links

Download this manual
Owner' s Manual
NanaWall SL45
Aluminum Framed Top-Hung Folding System
This Owner's Manual contains instructions on the installation, operation, maintenance and warranty of
the NanaWall SL45 Aluminum Framed Top-Hung Folding System. This manual is to be used by the
installer for installation and is to be kept by the Owner for reference. Replacement parts can be ordered
directly through NanaWall Systems.
Nana Wall Systems, Inc.
100 Meadowcreek Drive #250
Corte Madera, CA 94925
800 873 5673
info@nanawall.com
nanawall.com
415 383 3148
Fax 415 383 0312
©2022 Nana Wall Systems, Inc.

Advertisement

loading
Need help?

Need help?

Do you have a question about the SL45 and is the answer not in the manual?

Questions and answers

Related Manuals for NanaWall SL45

Summary of Contents for NanaWall SL45

  • Page 1 This Owner’s Manual contains instructions on the installation, operation, maintenance and warranty of the NanaWall SL45 Aluminum Framed Top-Hung Folding System. This manual is to be used by the installer for installation and is to be kept by the Owner for reference. Replacement parts can be ordered directly through NanaWall Systems.
  • Page 2 In most cases, all hinges, weather stripping, multiple locking, and flat handles are pre-attached to the panels and frame The installation of the SL45 System requires a working components. knowledge and experience in the use of tools, equipment and methods necessary for the installation of aluminum doors, windows, storefronts, and/or partitions.
  • Page 3 NANAWALL SL45 OWNER’S MANUAL HANDLING OF COMPONENTS BE NO UNEVENNESS OR BOWING. MAKE SURE THAT THE HEADER IS NOT TILTED OR TWISTED. Upon receipt, inspect the shipment to ensure it is in THERE SHOULD BE NO BUMPS ON THE FLOOR.

  • Page 4: Unit Installation

    NANAWALL SL45 OWNER’S MANUAL To avoid future problems, do not install your unit until the rough opening has been correctly prepared. UNIT INSTALLATION The Installation of the folding unit is described in the following categories: A. FRAME ASSEMBLY AND INSTALLATION B.
  • Page 5 Step A3 If a unit is ordered with a standard or a flush sill, assemble all frame parts as shown in Diagram 1. DIAGRAM 1: SL45 EXAMPLE OF A 3 PANEL UNIT INWARDS OPENING. Step A4 If the unit is ordered with a low profile saddle sill, then the side jamb rest on top of the sill. On the end of the sill are end dams with two flanges, which slide into the slots on the outside of the vertical side jambs.
  • Page 6 See Diagram 2 for Suggested Installation Details. Please note that these are suggestions only and that these may not be suitable in all applications. Step A6 Temporarily secure the frame to the rough opening with clamps. DIAGRAM 2: SL45 SUGGESTED TYPICAL INSTALLATION Suggested Typical Installation drawings shown are very general and may not be suitable for any particular installation.
  • Page 7 NANAWALL SL45 OWNER’S MANUAL Step A7 head jamb and sill; otherwise, it will interfere with the Looking on a standard installation, which is limited to rolling of the running carriages. areas with a basic wind speed of not more than 90 mph, in Make sure that the frame is level, plumb and square at a low rise building (max.
  • Page 8 NANAWALL SL45 OWNER’S MANUAL B. PANELS AND FOLDING HARDWARE Step A8 INSTALLATION Anchor the sill to the sub floor in correct relation to the Look for glass stops to determine the interior side of a finish floor. Make sure that the sill is not tilted or twisted.

  • Page 9: Final Steps

    NANAWALL SL45 OWNER’S MANUAL the running carriage is located is not higher than the Step B4 other corner of the panel. If it is slightly lower (not more If there are additional panels to be attached to the folding than 1/16"), it is okay. Proper spacing is critical for proper pair, close the pair by turning the handle 180°.
  • Page 10 NANAWALL SL45 OWNER’S MANUAL Step C6 Step C10 If the horizontal spacing are still not correct, try by To prevent uncontrolled movement of the panels when in open position, place appropriate door holder by others as adjusting the glass setting blocks that are bracing the glass in the panel.
  • Page 11 It is highly recommended that if not used, the NanaWall folding unit be kept closed as much as possible, in order to provide best security and weather resistance. When closed, please engage all locking mechanisms fully.
  • Page 12 NANAWALL SL45 OWNER’S MANUAL OPERATING THE SL-MULTIPOINT LOCKING ON THE PRIMARY SWING PANEL LOCKING UNLOCKING Normal position Engaging Locking Unlocking Disengaging locking points (Note that this is not one motion operation. Key or thumbturn must be unlocked first.) Be sure to check that the door is locked.
  • Page 13 NanaWall unit. Periodically premature failure. A unit with worn or damaged repaint or restain the wood as needed. Exposure to...
  • Page 14 See Finishing Recommendations in the Owner’s 2. All surfaces must be cleaned with a mild detergent Manual of the wood systems. soap and fresh water at least every month and more frequently if necessary. 9. All hardware, hinges and handles should be periodically cleaned with a soft cloth and mild After washing, the surface should be rinsed cleanser.
  • Page 15 If not Proper glass installation is critical, as, with the NanaWall correctly braced, the unit will not operate properly. folding system, glass is a structural part of the panel.
  • Page 16 APPENDIX A NANAWALL SL45 OWNER’S MANUAL 3. Measure both the vertical and horizontal dimensions up with a plastic pry bar at the lower corner below the of the glass and the panel opening. Subtract the upper setting block. These setting blocks should all vertical glass size from the vertical panel opening fit snugly but should not be forced.
  • Page 17 APPENDIX A NANAWALL SL45 OWNER’S MANUAL 13. After installing the panels, assuming that the head jamb and sill are level, check to see if the gap between the panel and head jamb and panel and sill is even across the width of the panel. With the glass weight, the out of square panels should become almost even.
  • Page 18 May 1, 2022, to be installed in the United States (excluding territories) or Canada. NanaWall shall have no obligation to respond under this Warranty until receipt of proper notice of a claim and an opportunity to respond. Upon notice and confirmation by NanaWall of a condition covered under this Warranty, NanaWall will respond in good faith and in a timely manner as follows: TEN YEAR COVERAGE.

  • Page 19: Additional Service Information

    Screens. For a screen part (excluding the screen mesh) with a material or workmanship issue that substantially impairs the function of the screen, NanaWall will, at its option, (1) ship a replacement screen or (2) upon return by owner, repair the screen without charge.
  • Page 20 This Warranty may only be modified by a writing signed by an officer of NanaWall. Any action taken by NanaWall does not create a new warranty or extend the duration of the original product warranty. A failure by NanaWall to enforce a warranty provision shall not constitute a waiver barring subsequent enforcement.
  • Page 21 • Products or components not supplied by NanaWall; Products that have not been paid for in full; Products ordered in larger sizes or special configurations beyond NanaWall’s published specifications. Product with glass that is heavier than NanaWall specifications;...
  • Page 22 NanaWall Warranty Registration Must be filled out and returned to Nana Wall Systems, Inc., 100 Meadowcreek Drive, Corte Madera, CA 94925 within 30 days from date of purchase of the NanaWall in order for the limited warranty to become effective. ________________________...