Subscribe to Our Youtube Channel
Related Manuals for GreenWorks Commercial 82TB16
Summary of Contents for GreenWorks Commercial 82TB16
- Page 1 82TB16 BIKE HANDLE TRIMMER OPERATOR MANUAL COUPE-HERBE MANUEL D’OPÉRATEUR CORTABORDES MANUAL DEL OPERADOR www.greenworkstools.com/82v-Commercial/ STB402 www.shopgreenworksgear.com/...
-
Page 2: Table Of Contents
English Description........2 Operation tips..........6 Line cut-off blade........7 Purpose............2 Cutting tips..........7 Overview............ 2 Adjust the length of the cutting line.... 7 IMPORTANT SAFETY Maintenance........7 INSTRUCTIONS......2 General information........8 Symbols on the machine....3 Clean the machine........8 Risk levels........ -
Page 3: Description
English DESCRIPTION IMPORTANT SAFETY INSTRUCTIONS PURPOSE READ ALL INSTRUCTIONS BEFORE USING (THIS This machine is used to cut grass, light weeds, and POWER TOOL) other similar vegetation at or around ground level. The WARNING cutting plane must be approximately parallel to the ground surface. -
Page 4: Symbols On The Machine
English accessories. Inspect appliance cord periodically, rings, bracelets, and keys. The battery or conductor and if damaged, have it repaired by an authorized may overheat and cause burns. service facility. Inspect extension cords periodically • Follow all charging instructions and do not charge and replace if damaged. -
Page 5: Risk Levels
English WARNING Symbol Explanation Discard all toxic materials in a specified manner to Do not expose the machine to rain or prevent contamination of the environment. Before moist conditions. discarding damaged or worn out Li-ion battery, contact your local waste disposal agency, or the local Keep all bystanders at least 15m Environmental Protection Agency for information and away. -
Page 6: Attach The Guard
English 5. Put the entire block in its housing on the shaft. WARNING 6. Set the auxiliary handle in the comfortable position. • If the parts have damage, do not use the machine. 7. Lock the auxiliary handle with the central knob. •... -
Page 7: Operation
English OPERATION 2. Push the on/off button again to turn the machine off. IMPORTANT Before you operate the machine, read and understand the safety regulations and the operation instructions. WARNING Be careful when you operate the machine. CONTROLS 8.1.1 ON/OFF BUTTON Push this button to connect and disconnect the electrical circuit of the machine. -
Page 8: Line Cut-Off Blade
English DIRECTION OF ROTATION DANGER AREA BEST CUTTING AREA ADJUST THE LENGTH OF THE CUTTING LINE While you operate the machine, the cutting line gets worn and shorter. You can adjust the length of the cutting line. 1. Hit the trimmer head against the ground while you LINE CUT-OFF BLADE operate the machine. -
Page 9: General Information
English GENERAL INFORMATION IMPORTANT Only your dealer or approved service center can do the maintenance that is not given in this manual. Before the maintenance operations: • Stop the machine. • Remove the battery pack. • Cool the motor. • Store the machine in cool and dry place. -
Page 10: Replace The Cutting Line
English 2. Bend the line at the midpoint and hook the loop into the slot in the center rim of the spool. Make sure that the line snaps into position in the slot. 3. With your finger between the lines, wind the lines equally and tightly around the spool in the indicated direction. -
Page 11: Assemble The Trimmer Head
English ASSEMBLE THE BRUSH CUTTER WARNING Wear gloves and be careful with sharp edges. WARNING Apply the guard to the blade. WARNING Use the specified Nylon locknut which is packed with the blade, to assemble the blade. WARNING ASSEMBLE THE TRIMMER HEAD You must change the locknut after you use it for 20 1. -
Page 12: Troubleshooting
English TROUBLESHOOTING Problem Possible Cause Solution The ma- The guard is not Remove the battery Problem Possible Cause Solution chine attached to the pack and attach the The ma- No electrical 1. Remove battery stops machine. guard to the machine. chine does contact between pack. -
Page 13: Technical Data
English Problem Possible Cause Solution Item Temperature The line The machine is 1. Cut with the tip of Battery storage tempera- 1 year: 32°F (0°C) - 73°F keeps used incorrectly. the line, avoid stones, ture range (23°C) breaking. walls and other hard 3 month: 32°F (0°C) - objects. -
Page 14: Exploded View
English replacement under this warranty unless such return is requested in writing by Greenworks. EXPLODED VIEW No. Part No. Qty Description No. Part No. Qty Description 311042462E Rear handle assembly 311022461E Motor head assembly 311022462E Handle case assembly C1100403-00 Trimmer head assembly 311012462E Auxiliary handle assembly 311042461E...
Need help?
Do you have a question about the 82TB16 and is the answer not in the manual?
Questions and answers