Artnet Connection - Prolights Tribe GLOBE User Manual

10
3.8 ARTNET CONNECTION (MADRIX SOFTWARE CONTROL)
The GLOBE is equipped with 5 DMX configuration that allow the management of the lights through the
MADRIX software (not included).
• Press the button MENU so many times until the display shows DMX CH.
• Select the desired DMX configuration 150CH - 225CH - 300CH - 375CH - 450CH through the buttons UP/DOWN,
then press ENTER to confirm.
• Press the button MENU so many times until the display shows DMX Address.
• Press the button UP/DOWN to select the desired value 001-512.
• Press the button ENTER to confirm the setting.
• Set all driver bar to same DMX address.
Once the procedure is finished, you can control all the driver bars connected by MADRIX Software.
POWER INPUT
GLOBE
SIGNAL
ARTNET TO DMX
CONVERTER 1
NET HUB
ARTNET TO DMX
CONVERTER 2
Fig.5