Menu Structure; Automatic Mode; Master/Slave Mode - Prolights Tribe GLOBE User Manual

8

3.3 MENU STRUCTURE

3.4 AUTOMATIC MODE

The GLOBE can independently runs its autoshow.
• Press the button MENU so many times until the display shows Program.
• Press the button UP/DOWN to enable (Yes) or disable (No) the automatic mode.
• Press the ENTER button to confirm.
To adjust the auto program speed, proceed as follows:
• Press the button MENU so many times until the display shows Speed.
• Press the UP/DOWN button to select the desired speed (1-9).
• Press the ENTER button to confirm.

3.5 MASTER/SLAVE MODE

This mode will allow you to link up the units together. Choose a unit to function as the Master. The unit
must be the first unit in line; other units will work as slave with the same effect.
• Press the button MENU so many times until the display shows Master - Slave.
• Press the button UP/DOWN to select Master/Slave.
• Press the ENTER button to confirm.
• Select the desired program (see section 3.4).
• Use standard DMX cables to daisy chain your units together via the DMX connector on the rear of the
units.
GLOBE
MENU
1 Version Firmware
DMX CH
2
DMX Address
3
Master/Slave
4
Mix Display
5
Length
6
Program
7
Speed
8
ð
Ver. 3.0
ð
DMX 12 CH
DMX 150 CH
DMX 225 CH
DMX 300 CH
DMX 375 CH
DMX 450 CH
ð
001 - 512
ð
Master/Slave
ð
2 m
3 m
4 m
5 m
6 m
ð
Yes/No
ð
1 - 9