Table of Contents
Advertisement
Item
Description
Number
4
Priority Channel
5
• Scan is enabled
• Priority Scan is activated
6
Receiver Monitor
7
Battery Indicator
8
7-character alphanumeric display
9
Group Scan is enabled
10
Group Number
11
• PL: CTCSS System is activated
• DPL: DCS System is activated
12
Lone Worker
13
• High/Low Transmit
• Power Mode On
Getting Started
This chapter provides instructions on how to prepare your radio for use.
Charging the Battery
As the battery discharges during use, the voltage gradually becomes
lower. When the battery voltage becomes too low, substitute a freshly
charged battery and recharge the depleted pack. The Battery Indicator
on the LCD of the radio blinks when the battery voltage is low.
Caution:
• Danger of explosion if battery is replaced with an incorrect
battery. Replace only with the same or equivalent type.
• Always use the Motorola Solutions FNB-143 Lithium Ion (Li-
Ion) battery pack.
• Do not expose battery pack to excessive heat such as sunshine or
fire.
• Risk of explosion if battery is replaced by an incorrect type. Dispose
of used batteries according to the instructions.
• Perform the battery charging where the ambient temperature range is
+ 5 ℃ to + 35 ℃. Charging out of this range could cause damage to
the battery pack.
• Use only the Motorola Solutions AC adapter.
1. Insert the DC plug into the DC jack on the rear panel of the optional
desktop charger.
2. Connect the AC adapter to the AC line outlet.
3. Insert the battery pack into the desktop charger by aligning the slots
of the battery pack with the guides in the desktop charger.
Align the slot
with the guide
Desktop Charger
4. If you are charging with the transceiver attached, turn off the
transceiver. The antenna jack must be on the left side when viewing
the charger from the front.
If the battery pack is inserted correctly, the LED indicator changes to
green.
5. Disconnect the battery pack from the desktop charger after the
charging is completed.
The LED indicator changes to green after charging is completed.
6. Unplug the AC adapter from the AC line outlet.
English
AC Line Outlet
AC Adapter
11
Advertisement
Table of Contents
