Toro TimeCutter 138-2537 Installation Instructions

Heat Shield Kit
TimeCutter
Model No. 138-2537
This product contains a chemical or chemicals known to the State of California
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Heat shield
Bolt
Installing the Kit
1. Park the machine on a level surface, shut off the
engine, engage the parking brake, and remove
the key.
2. Wait for the machine to cool completely.
3. Remove and discard the existing 2 bolts and
heat shield as shown in
1. Existing heat shield
© 2018—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
® Riding Mower
Proposition 65 Warning
to cause cancer, birth defects, or reproductive harm.
Figure 1.
Figure 1
2. Bolt
Register at www.Toro.com.
WARNING
CALIFORNIA
Qty.
1
Install the kit.
4
g246575
Form No. 3421-634 Rev A
Installation Instructions
Use
Original Instructions (EN) All Rights Reserved *3421-634* A
Printed in the USA