XTline XT103160 User Manual page 33

ELECTRIC TOOL HANDLING AND MAINTANCE
ECN welder uses imported IGBT and fast recovery diodes as main electric components.
It is supplemented by a specially developed main PCB board. In addition, the uniform
regulation of welding current has been designed to guarantee the arc reach good
welding process adaptability. What's more, its perfect dynamic protection features
ensure that it is safe and reliable when use. It is ideal for using low carbon steel,
stainless steel, alloy steel etc.
ECN Features:
40% high duty cycle.
Lower cost operation, more portable, more compact, superior output.
Excellent arc properties and solution droplet transfer.
With the protections of over-heating, over-voltage, over-current.
Digital display function when use (only for plastic shell).
Plastic handle makes it easy to carry.
Convenient quick connection for the output makes it quick, safe, simple and stable.
NOTES: The above description may be modified without prior notice such as omissions, unclear
statements about this welder.
Cautions
* ECN Inverter DC Arc welder is a kind of electronic product which makes its components more easily
damaged. While replacing or modulating, the strength should not be too much in order to avoid causing
damage to the device.
* Check the connection to see if it is correct or reliable each time before working. Besides, ensure the
grounding outlet device correct.
* While using, as smoke is harmful to human's health, the operation must be carried out in the ventilation
and exhaust facilities.
* Prohibit non-professionals to change or replace the welder.
* Since the welder owns strong electromagnetic and radio frequencies, the people with cardiac pacemakers
affected by the interference electromagnetic, electrical frequency are not allowed to stay nearby.
* When it works, please pay attention to its rated duty cycle. Do not overload
Safety Precaution for Installation and Location
* In some areas, where something may fall from the sky, personal safety precaution should be taken.
* In some areas around construction site, something like the dust, acid, corrosive gases or other substance
in the air can nor exceed the standard value except those generated while welding.
* It is should be equipped in the open air where there is no direct sunlight, anti-rain, temperature range
from -10℃ to +40℃ and low humidity place.
* 50cm space is needed to ensure good ventilation.
* No metal impurities are tolerant inside the welder.
* In some areas, there is no severe vibration.
* Make sure no interference will be caused to the surrounding in the welding area.
* Whether the power supply capacity is sufficient to allow the welder to work normally or not. And a safety
protection device should be equipped in the input power.
* Prevent it from dumping if the welder is put in the place of over 10°incline.
Security Check
The following items must be checked up by the operator each time before access to the power source.
* Make sure the power socket is reliably grounded.
* Make sure the output terminals are well connected without short circuit.
* Make sure output and input cables are perfect with no exposure.