Summary of Contents for Established & Sons Zero-In
Page 1
ZERO-IN ESTABLISHED & SONS BARBER OSGERBY United Kingdom Phone +44 (0)20 7608 0990 establishedandsons.com ESTANDSONS LTD Estandsons Warehouse Intereuropa d.d. Mednarodni prehod 8, SI-5290 Šempeter pri Gorici, Slovenija...
Page 2
ZERO-IN BARBER OSGERBY The Zero-In table creates an illusion of weightlessness, with seamless sloping walls at unexpected angles topped with a glass surface, all supported by hidden feet that create a shadow gap below the structure. THE DESIGNER Edward Barber and Jay Osgerby founded their London studio in 1996 after graduating with Master’s in Architecture from the prestigious Royal College of Art in London.
Page 3
General Information Installation DESIGN 2005 DESCRIPTION Low Table MATERIALS Satin-finish polyester moulded compound, 4mm toughened glass DIMENSIONS L900mm × D900mm × H350mm USER INSTRUCTIONS Established & Sons disclaims any responsibility deriving from incorrect use of the mentioned object. Do not place very hot or very cold items on the glass surface unless adequately thick table mats are used to prevent such items from coming into contact with the glass.
Page 4
Zero-In and align it with the base (B). Carefully lift the Zero-In up and over the cross and place it back on the floor so that the internal packaging is inside the Zero-In and raising the glass.
Page 5
3. Carefully lift the Zero-In so that the glass sits back in place on the 4. Place the Zero-In back on the floor in position. inside edge (Adjust as needed), and over the cardboard support.
Page 6
About Established & Sons Established & Sons is a British brand representing all that is innovative in contemporary design. By supporting the best creators of our time, it has built a collection for people who are passionate about design, presenting imaginative products with style and personality. Designers and artists are afforded the freedom to explore their own language, advancing pioneering ideas that deliver exceptional furniture and lighting collections.
Need help?
Do you have a question about the Zero-In and is the answer not in the manual?
Questions and answers