Table of Contents
Advertisement
CHAPTER 1: HEADLINE
CHAPTER 5: DOCKING WIZARD UTILITY (MAC OS)
a. Calibrate Mouse Switching
After a connection is successfully made, you can move the mouse on both computers or on the docking station between two
computers, and you can use the keyboard to enter data on the computer that the mouse focuses on.
Under the "Calibrate Mouse Switching" utility, you can set up the relative positions of the PCs. This helps to set up the mouse
moving to the edge of the monitors.
b. Switch UFP
When a docking station connects to two PCs, devices under the docking station will be recognized and enumerated by the
master host; for example, the storage devices will only be shown on master side, and the other side is the slave or client host. The
"Switch UFP" function enables you to switch the roles of master and client host.
Under the "Switch UFP" option, the HDMI and two DPs will display the same outputs from the Host, and HDMI output shows the
master PC's desktop. (Mode: B; Figure 2-5)
FIGURE 5-11. CALIBRATE MOUSE SWITCHING
FIGURE 5-12. SWITCH UFP
1.877.877.2269
1.877.877.2269
BLACKBOX.COM
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
21
Advertisement
Table of Contents
