Table of Contents
Advertisement
CHAPTER 2: QUICK INSTALLATION/SETUP
2.4 HARDWARE INSTALLATION
----------
Data Connection
----------
For Host only
----------
Power Delivery
K-lock
Power On/Off Switch
1. To download the software, go to blackbox.com. Enter USBC2000-4KDUAL in the search box. Click on the product on the "Products"
page. Then click on the "Support" tab and select the Docking Wizard software. You may download the latest drivers for Windows
macOS
and Android OS from the following link: http://www.displaylink.com/downloads/
®,
2. Connect the power adapter (PSU) to the DC jack on the docking station.
3. Connect the attached (2) USB-C to C cable to USB-C (upstream) ports (host 1/2) on the docking station and then to an available USB-C
port on host 1/2.
4. Connect your DisplayPort™ and HDMI displays to the corresponding ports on the docking station.
5. Connect any other devices to the docking station, including an RJ-45 (Gigabit) device for network connection/USB peripherals/
speakers and microphones.
6. Power on the docking station. It is now ready to use.
8
HDMI (DP Alt)
2
PSU (230 W)
100 W
100 W
1
2
Host switch
by Docking
Wizard S/W
"Switch UFP"
Sharing between 1 and 2
**DP Alt mode supported
FIGURE 2-3. HARDWARE INSTALLATION
1.877.877.2269
Dual DP (DisplayLink)
1
1
RJ-45
(Host only)
Display mode
switch button
BLACKBOX.COM
Display Mode
HDMI (DP Alt) Dual DP (DisplayLink)
1
Hot Key / Button
switch
HDMI (DP Alt) Dual DP (DisplayLink)
2
HDMI (DP Alt) Dual DP (DisplayLink)
2
HDMI (DP Alt) Dual DP (DisplayLink)
1
For Host only
USB peripherals
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
1
1
1
1
2
2
2
2
,
®
Advertisement
Table of Contents
