Design Information; Product Dimensions And Clearances - Monogram UX12BS36PSS Installation Instructions Manual

30, 36 and 48 dual fuel professional ranges

Hide thumbs

Table of Contents

Available languages

PRODUCT DIMENSIONS AND CLEARANCES

48" Range Models

47-7/8"

Width

29 3/8" Depth

to Front of

Bullnose

35-1/4" to 36-3/4"

Height to trim.

Trim to be flush

or higher than

countertop.

28-1/2" Depth

to Front of Door

WARNING

A suitable overhead vent

hood is required for model ZDP484. Installations

without a hood require 48" minimum to

combustibles. A custom hood installation

with exposed horizontal combustible surfaces

must have an Auto-On feature. Refer to hood

installation instructions for specific hood

clearances.

The surface of the entire back wall above the

range and below the hood must be covered

with a non-combustible material such as metal,

ceramic tile, brick, marble or other stone.

CAUTION

To prevent drafts from

affecting burner operation, seal all openings

in floor under appliance and behind appliance

wall.

** A s defined in the National Fuel Gas Code (ANSI

Z223.1/CSA B149.1, Current Edition). Clearances from

non-combustible materials are not part of the ANSI

Z21.1/CSA 1.1 scope and are not certified by CSA.

Clearances less than 12" must be approved by local

codes and/or the authority having jurisdiction.

ADDITIONAL CLEARANCES:

Allow 12" minimum clearance to an adjacent wall on

each side.

Working areas adjacent to the rangetop should have

18" minimum clearance between countertop and the

bottom of the wall cabinet.

For island installation, maintain 2-1/2 in. minimum from

cutout to back edge of countertop and 3 in. minimum

from cutout to side edges of countertop (see top view).

31-2000667 Rev. 1