Table of Contents
Advertisement
• Cooking zones are grouped according to
the location and number of the phases in
the hob. Each phase has a maximum
electricity loading of 3680 W. If the hob
reaches the limit of maximum available
power within one phase, the power of the
cooking zones will be automatically
reduced.
• The maximum heat setting is visible on
the slider. Only the digits in white are
active.
• If a higher heat setting is not available
reduce it for the other cooking zones first.
Refer to the illustration for possible
combinations in which power can be
distributed among the cooking zones.
8. FLEXIBLE INDUCTION COOKING AREA
WARNING!
Refer to Safety chapters.
8.1 FlexiBridge
The area on the left side can be combined
into two cooking zones with different sizes, or
into one large cooking area. You may choose
a combination of 4 sections which depends
on the size of the cookware you want to use.
The cooking zone indicators change
automatically and show the possible
combination.
FlexiBridge Standard is the default mode
which activates automatically when you
activate the hob. Two cooking zones operate
independently.
Touch
to switch between the FlexiBridge
modes.
8.2 FlexiBridge Standard mode
This mode is active when you activate the
hob. It connects the sections into two
separate cooking zones. You can set the
16
ENGLISH
heat setting for each zone separately.
Correct cookware position:
Incorrect cookware position:
Advertisement
Table of Contents
