Advertisement
5. Connect a patch cord from one of the Click 222 bridge ports to bus 2 of the rack cards.
6. Use short patch cords to daisy-chain bus 2 together on all the cards. This bus will be used for configuration.
See the knowledge base article 0518 Using the Click 112/114 for more information on configuring and using the
detector rack cards.
© 2022 Wavetronix LLC. All rights reserved. Protected in the US by patents viewable at www.wavetronix.com/en/legal. Protected by Canadian Patent Nos. 2461411; 2434756; 2512689; and European Patent Nos. 1435036; 1438702;
1611458. Other US and international patents pending. Wavetronix, SmartSensor, Click, Command and all associated logos are trademarks of Wavetronix LLC. All other product or brand names as they appear are trademarks or
registered trademarks of their respective holders. Product specifications are subject to change without notice. This material is provided for informational purposes only; Wavetronix assumes no liability related to its use.
WX-501-0527 • 05.22
4 of 4
Advertisement
