BOSS ILLUMINATION RAY II Product Manual

Solar street light

Advertisement

RAY II
SOLAR STREET LIGHT

PRODUCT SPECIFICATIONS

Input Voltage
: 100-240VAC
Ambient Temperature : -10 to 45°C
Dimming
: No
Weight
: 7.7kg – 18.5kg
64mm
65
IP

PARTS INCLUDED

LED
Luminaire
WARRANTY STATEMENT This product is covered by a 3 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will fix
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit www.bia.lighting/warranty
BIA reserves the right to change specifications and other information, modify products and discontinue items without prior notification.
10.19
© 2019
COPYRIGHT BIA
V
08
IK
Disclaimer: Please read these warranty
and installation instructions carefully
before installing the product.
BIA products are manufactured
and certified in accordance with all
mandatory Australian Standards.
All products must be installed by a
licensed electrician, in accordance
with relevant Australian Standards.
Technical data and information subject
to changes, visit our website for the
most updated version.

PRODUCT VARIANTS

Power: 10W
15W
20W
25W
30W
40W

ADDITIONAL INFORMATION

1. This luminaire is not dimmable.
2. Luminaire installation angle is adjustable. Refer instructions
overleaf.
3. Installation must be carried out with care to ensure the surface of
the luminaire is not scratched or damaged. Damaged surfaces will
result in material corrosion when exposed under harsh weather
conditions.
4. Please ensure luminaire cover is sealed.
5. If cleaning maintenance is required, use a clean microfibre cloth,
slightly dampened with a mild dilution of detergent that is PH
neutral, alcohol free and non-abrasive.
page 1 / 3
P R O D U C T M A N U A L
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
CCT :
3000K
4000K
5000K
www.bia.lighting | sales@bia.lighting

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RAY II and is the answer not in the manual?

Questions and answers

Summary of Contents for BOSS ILLUMINATION RAY II

  • Page 1 P R O D U C T M A N U A L RAY II Disclaimer: Please read these warranty and installation instructions carefully before installing the product. SOLAR STREET LIGHT BIA products are manufactured and certified in accordance with all mandatory Australian Standards.
  • Page 2 P R O D U C T M A N U A L INSTALLATION INSTRUCTIONS A ADJUSTING THE ANGLE Loosen the bolt screws and adjust the spigot bracket by sliding it up or down. Tighten the bolt screws to secure the bracket. B INSTALLATION Ensure pole of the correct diametre has been installed/supplied.
  • Page 3 P R O D U C T M A N U A L DIAMENSION DIAGRAM Weight RAY II 7.7kg Ø64mm 180mm 643mm RAY II 10.5kg Ø64mm 180mm 893mm RAY II 12.8kg Ø64mm 180mm 1033mm RAY II 14.5kg Ø64mm 180mm 1189mm RAY II 17.0kg...

Table of Contents