BOSS ILLUMINATION VIRGO Product Manual

VIRGO
LED CABINET LIGHT
PRODUCT SPECIFICATIONS
Power : 3W
Input Voltage : 12VDC
Ambient Temperature : -10 to 45°C
Dimming : PWM
60mm
PARTS INCLUDED
LED Module White Fascia
OPTIONAL COMPATIBLE PARTS sold separately
Dimmable Remote Surface
Driver Control + Mount
Receiver Bracket
4 6
1 to 4 1 to 6 1 to 8
Split Cable Split Cable Split Cable
WARRANTY STATEMENT This product is covered by a 3 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will fix
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit www.bia.lighting/warranty
BIA reserves the right to change specifications and other information, modify products and discontinue items without prior notification.
05.19
© 2019
COPYRIGHT BIA V
44
IP
Other colours:
- Silver
- Brushed Chrome
- Black
8
Disclaimer: Please read these warranty
and installation instructions carefully
before installing the product.
BIA products are manufactured
and certified in accordance with all
mandatory Australian Standards.
All products must be installed by a
licensed electrician, in accordance
with relevant Australian Standards.
Technical data and information subject
to changes, visit our website for the
most updated version.
PRODUCT VARIANTS
CCT : 3000K
4000K
5000K
RGB
ADDITIONAL INFORMATION
1. BIA recommends using a low voltage dimmer with this product.
2. This product can be customised to order by swapping drivers of a
different size and cables of a different length.
3. This product is suitable for outdoor under cover use.
4. This product is suitable to install onto ceilings and cabinets.
5. If cleaning maintenance is required, use a clean microfibre cloth,
slightly dampened with a mild dilution of detergent that is PH
neutral, alcohol free and non-abrasive.
page 1 / 3
P R O D U C T M A N U A L
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
www.bia.lighting | sales@bia.lighting