BOSS ILLUMINATION VIPER Product Manual

VIPER
POLE LIGHT
PRODUCT SPECIFICATIONS
Input Voltage : 100-277 VAC
Ambient Temperature : -10 to 45°C
Weight : 6kg
60mm 65
IP
PARTS INCLUDED
LED 8-10m Cable
Luminaire
WARRANTY STATEMENT This product is covered by a 5 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will fix
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit www.bia.lighting/warranty
BIA reserves the right to change specifications and other information, modify products and discontinue items without prior notification.
© 2020
COPYRIGHT BIA V
03.20
Disclaimer: Please read these warranty
and installation instructions carefully
before installing the product.
BIA products are manufactured
and certified in accordance with all
mandatory Australian Standards.
All products must be installed by a
licensed electrician, in accordance
with relevant Australian Standards.
Technical data and information subject
to changes, visit our website for the
most updated version.
PRODUCT VARIANTS
Power :
50W
100W
CCT :
3000K
4000K
5000K
Dimming: 0-10V
DALI
ADDITIONAL INFORMATION
1. 0-10V dimmable option available. These cables must be
terminated if not in use.
2. Please ensure luminaire cover is sealed.
3. Installation must be carried out with care to ensure the surface
of the luminaire is not scratched or damaged. Damaged surfaces
will result in material corrosion when exposed under harsh
weather conditions.
4. If cleaning maintenance is required, use a clean microfibre cloth,
slightly dampened with a mild dilution of detergent that is PH
neutral, alcohol free and non-abrasive.
page 1 / 2
P R O D U C T M A N U A L
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
www.bia.lighting | sales@bia.lighting