BOSS ILLUMINATION SOLIS Product Manual

SOLIS
TRACK LIGHT
PRODUCT SPECIFICATIONS
Power : 30W
Input Voltage : 240VAC
Operating Temperature : -10 to 40°C
Dimming : Yes
Material : Aluminium
3
circuit
PARTS INCLUDED
x1
Track Light
OPTIONAL COMPATIBLE PARTS sold separately
x1 x1
Track Rail Controller
WARRANTY STATEMENT This product is covered by a 3 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will fix
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit www.bia.lighting/warranty
BIA reserves the right to change specifications and other information, modify products and discontinue items without prior notification.
© 2020
COPYRIGHT BIA V
20
IP
11.20
Disclaimer: Please read this product
manual carefully before installing the
product.
Warranty is void if installation guidelines
are disregarded, if the product has been
modified, or if damage is caused by
misuse or improper installation.
Images, drawings and diagrams are for
illustrative purposes only.
BIA products are manufactured
and certified in accordance with all
mandatory Australian Standards.
Technical data and information subject
to changes. Please visit our website for
latest version.
PRODUCT VARIANTS
Colour : White
Black
Silver
REMOTE CONTROL
Power : 0 to 30W
CCT : 2700K to 5000K
Beam Angle : 15º to 60º
Beam Direction : 350º horizontal rotation / +-90º vertical rotation
Dimming : 5% to 100%
Paring devices : up to 999 track lights per controller
ADDITIONAL INFORMATION
1. This product is suitable for indoor use only.
2. Configurations can be made through controller, see Remote
Control section above.
3. If cleaning maintenance is required, disconnect from mains
supply and allow luminaire to cool. Use a clean microfibre cloth,
slightly dampened with a mild dilution of detergent that is PH
neutral, alcohol free and non-abrasive.
4. Do not use harsh chemicals or solvents. Do not use high
pressure cleaners.
5. Care must be taken during installation and maintenance to
prevent accidental damage to the surface of the luminaire. These
damages may result in corrosion.
page 1 / 2
P R O D U C T M A N U A L
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
www.bia.lighting | sales@bia.lighting