LG 55LP1M User Manual page 9

Using the Remote Control
1
EXIT
Exit the OSD by pressing the EXIT Button.
PIP (Picture in Picture) Button
The sub-screen moves to the next mode whenever you press this button.
: SMALL -> MEDIUM -> LARGE -> OFF
POP (Picture out Picture) Button
The sub-screen moves to the next mode whenever you press this button.
: POP ON -> PBP(FULL) -> PBP(4:3) -> OFF
POP ON
SWAP Button
You can swap the main screen and the sub-screen when the PIP/POP/PBP function is used.
PIP
POP
PBP
When 'Input Signal 1' comes on in the main screen, only 'Input Signal 2' can be displayed on the sub-
screen. On the contrary, if the main screen displays 'Input Signal 2', the sub-screen can display 'Input
Signal 1' only. You can swap 'Input Signal 1' and 'Input Signal 2' using the SWAP button.
*PIP function is not supported in 480i, 576i and 1080i modes.
<Table of PIP/POP/PBP Function Support>
Main Screen
Sub-Screen
PBP (FULL)
SWAP
SWAP
A7
PIP
PBP (4:3)