LG 55LP1M User Manual page 12

A
Turn on power by pressing the power button on the product.
Turn on the PC.
B
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT
Or, press the INPUT button at the front side of the product.
INPUT
A
When connecting with a DVI-D signal input cable.
• Select DVI : DVI-D digital signal.
When connecting with a D-Sub signal input cable.
B1
C
• Select RGB1 : 15-pin D-Sub analog signal.
B2
• Select RGB2 : 15-pin D-Sub analog signal.
•
How to connect to two computers.
Note Connect the signal cables (DVI and D-Sub) to each computer.
Press the INPUT button in a remote control to select the computer to use.
•
Directly connect to a grounded power outlet on the wall or a power bar with a
ground wire.
Power button
ENTER
SELECT
A10
INPUT SELECT