Connecting A Usb Flash Drive To And Detaching It From The Digital Piano - Casio Privia PX-S6000 User Manual

Connecting a USB Flash Drive to and Detaching It from the Digital Piano

• Be sure to observe the precautions provided in the documentation that comes with the USB flash drive.
• Avoid using a USB flash drive under the following conditions. Such conditions can corrupt data
stored on the USB flash drive.
– Areas subjected to high temperature, high humidity, or corrosive gas
– Areas subjected to strong electrostatic charge and electrical noise
• Never remove the USB flash drive while data is being written to or loaded from it. Doing so can
corrupt the data on the USB flash drive and damage the USB Type A port.
• Never insert anything besides a USB flash drive into the USB Type A port. Doing so creates the risk
of malfunction.
• When you perform a USB flash drive operation while a USB flash drive is plugged in, the Digital
Piano initially needs to perform a "mounting" sequence to prepare for data exchange with the USB
flash drive. Digital Piano operations may be momentarily difficult while a mounting sequence is being
performed. The message "MOUNTING" is displayed while the USB flash drive is being mounted. It
may take up to 10 or 20 seconds or even longer for a USB flash drive to be mounted. We
recommend that you do not attempt to perform any operation on the Digital Piano while a mounting
sequence is in progress. A USB flash drive needs to be mounted each time it is connected to the
Digital Piano.
■ To insert a USB flash drive
1.
As shown in the illustration below, insert the USB flash drive into the Digital
Piano's USB Type A port.
• Carefully push the USB flash drive in as far as it will go. Do not use undue force when inserting
the USB flash drive.
• Static electricity conducted to the USB Type A port from your hand or from a USB flash drive
can cause malfunction of the Digital Piano. If this happens, turn the Digital Piano off and then
back on again.
■ To remove a USB flash drive
1.
Check to confirm that no data read/write operation is in progress.
• Do not proceed to step 2 if data is being read or written, as in the following cases:
− If "MOUNTING" or "Wait..." is displayed on screen
− If the USB flash drive is in use by the audio recorder or SONG mode.
2.
Pull the USB flash drive straight out.
• A USB flash drive can become warm after very long use. This is normal and does not indicate
malfunction.
USB flash drive
USB Type A port
EN-141
USB Flash Drive