Advertisement
Quick Links
Advertisement
Related Manuals for Genexis Pulse Series
Summary of Contents for Genexis Pulse Series
- Page 1 EX600 Pulse Series Installation Guide Wi-Fi EasyMesh supported...
- Page 2 You're just a few steps away to install your device Pulse EX600 can be setup as a router or wireless/wired extender. via the Genexis EasyWiFi app Various translations of this document (if available) and additional product information can be found on https://genexis.eu/product/pulse/downloads...
- Page 3 Pulse EX600. eu/pulse-installation-guide 4. Flip the ON/OFF switch at the back of the device to turn it on.
- Page 4 Wireless extender Switching the WiFi ON/OFF 9. Wait until the Status LED stops Manual pairing 1. Place the additional Pulse EX600 blinking and turns solid green. The WiFi function of the Pulse EX600 The WiFi network name and WiFi key as described on the left.
- Page 5 LED & button overview Changing your network settings Status You can access the Pulse EX600 Green – system is operational ready web interface (GUI) to change your Green (blinking) – connectivity lost network settings. The Pulse EX600 Yellow – system startup or WiFi OFF must be in router mode to access Yellow (blinking) –...
-
Page 6: Port Overview
Port overview WAN port Power port Reset ON/OFF USB 2.0 LAN ports button switch port Reset button (recessed) ON/OFF switch Reboot – press and release once Switch ON – flip the switch to ON Factory reset – press and hold until the Switch OFF –... -
Page 7: Troubleshooting
2. Wait until the Status LED turns Automated pairing (WPS) between router and the Pulse EX600 is solid green again. the Pulse EX600 and Genexis router not stable. Please check the cable or personal device failed. Please follow connection with the Genexis router... -
Page 8: Eu Declaration Of Conformity
EU Declaration of Conformity Hereby, Genexis Netherlands B. V . declares that the product Pulse EX600 is in compliance with Directives 2014/53/EU, 2009/125/EC, 2011/65/EU and Delegated directive 2015/863. The full text of the EU declaration of conformity is available at the following internet address: https://genexis.eu/product/pulse/red/pulse-ex600... - Page 9 Revision 1.7 September 2022, Copyright © 2022 Genexis Netherlands B. V . All rights reserved. Genexis assumes no responsibility for any inaccuracies in this document. Genexis reserves the right to change, modify, transfer, or otherwise revise this publication without notice.
Need help?
Do you have a question about the Pulse Series and is the answer not in the manual?
Questions and answers