Page 1
E600 Pure Series Installation Guide Wi-Fi EasyMesh supported...
Page 2
3. Connect the supplied power adapter turns off. • Genexis Pure E600 pure/downloads to the Pure and plug the adapter into a • Switch ON: On the Pure E600, press and • Power adapter 2. Use the drilling guide to drill the holes, power socket.
Page 3
Connecting to the wireless network Using the web interface Power saving options You can connect your personal device to the You can access the Pure E600 web interface Power saving options are available via the Pure E600 via manual pairing. If automated via a wired connection or wireless connection.
LED & button overview Port overview Status Reset button (recessed) Green – system is operational ready Reboot – short press (up to 10 seconds) Yellow – system boot initialization Factory reset – long press (more than USB 2.0 port Yellow (blinking) - system is not ready yet 10 seconds) Blue...
Troubleshooting Is the Status LED solid red? Is the Internet LED off? Return the Pure E600 to factory default Contact your service provider. Pure E600 does not have an internet settings connection. Please contact your With the reset button you can reset the Pure Is the Status LED not solid blue after service provider.
EU Declaration of Conformity Hereby, Genexis Netherlands B. V . declares that the radio equipment type Pure E600 is in compliance with Directive 2014/53/EU, Directive 2009/125/EC, Directive 2011/65/EU and Delegated Directive 2015/863. The full text of the EU declaration of conformity is available at the following internet address: https://genexis.eu/product/pure/red/pure-e600...
Need help?
Do you have a question about the Pure Series and is the answer not in the manual?
Questions and answers