Table of Contents
Advertisement
How to charge the Ba�ery
BATTERY CHARGING:
1. Posi�on the massager on the chair or other support.
2. Connect the adapter cable to the corresponding cable on the cushion.
3. Plug the charging adapter into an outlet.
4. Normally it takes 2.5 hours to fully charge the ba�ery.
5. Indicator light :
While charging, the indicator light will turn 'RED' and blink
When fully charged, the indicator light will keep 'RED' and not blink
( If the ba�ery is full, the massager can work con�nously for around 80 minutes. )
When the ba�ery is under 20%, the indicator light will turn 'Green' and blink.
When the ba�ery is over 20%, the indicator light will keep 'Green' and not blink.
6. It is safe to use the massager whilce charging.
NOTE:
A�en�on ! Please only use provided charging adapter.
HEAT
SPOT
DEMO
CHARGE INDICATOR
5
Indicator light
Advertisement
Table of Contents
Need help?
Do you have a question about the SL-166 and is the answer not in the manual?