Table of Contents
Advertisement
Operation and controller instructions
Power Button
Press to turn on the
massager and activate
shiatsu clockwise rotation
at high level, Press again
to turn off the massager
Intensity Button
When the massager is
turned on,Press to set
the shiatsu intensity at
high or low level
Battery Charging
1. Connect the adapter cable to the corresponding cable on the device.
2. Plug the charging adapter into an electric outlet.
3. Normally it takes 2.5 ~3 hours to fully charge the battery.
4. While charging, the indicator light on adapter turns "Red",
When full charged, the indicator light on adapter turns "Green"
5. If the battery is full, the massager can work continuously for around 60 minutes.
6. Can not use the massager while charging. While turn on the massage function, stop
charging, while turn off the massage function, charging again.
NOTE:
Attention ! Please only use provided charging adapter.
Direction Button
When the massager is
turned on,Press to shift
Shiatsu clockwise rotation
or Shiatsu anti-clockwise
rotation
Heat Button
When the massger is turned
on. Press to turn on or off
the heat
Indicator light
3
- Quick Links:
- Battery Charging
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SL-632NC and is the answer not in the manual?
Questions and answers
no light on charge
The charger for the Snailax SL-632NC has an indicator light that turns red while charging and green when fully charged. If there is no light on the charger, it could indicate that the charger is not properly plugged into the outlet or the device, the power source is not working, or the charger is faulty.
This answer is automatically generated