How To Charge The Battery; Battery Charging - Snailax SL-166 Use & Care Manual

How to charge the Battery

BATTERY CHARGING:

1. Position the massager on the chair or other support.
2. Connect the adapter cable to the corresponding cable on the cushion.
3. Plug the charging adapter into an outlet.
4. Normally it takes 2.5 hours to fully charge the battery.
5. Indicator light :
While charging, the indicator light will turn 'RED' and blink
When fully charged, the indicator light will keep 'RED' and not blink
( If the battery is full, the massager can work continously for around 80 minutes. )
When the battery is under 20%, the indicator light will turn 'Green' and blink.
When the battery is over 20%, the indicator light will keep 'Green' and not blink.
6. It is safe to use the massager whilce charging.
NOTE:
Attention ! Please only use provided charging adapter.
HEAT
SPOT
DEMO
CHARGE INDICATOR
�
Indicator light