Battery Charging - Snailax SL-665C Use & Care Manual

Operation and controller instructions
Mode I: Only Shiatsu function, no percussion.
Mode II: Shiatsu & Percussion work simultaneously
Power Button
Press to turn on the
massager and activate
Mode I function, Press
again to turn off the
massager.
Intensity Button
Press to set Mode II
(Shiatsu & Percussion)
intensity at the low or
high level.
Note: It is invalid while
the massager is in Mode
I (only Shiatsu)

Battery Charging

1. Connect the adapter cable to the corresponding cable on the device.
2. Plug the charging adapter into an electric outlet.
3. Normally it takes 2.5 ~3 hours to fully charge the battery.
4. While charging, the indicator light on adapter turns "Red",
When full charged, the indicator light on adapter turns "Green"
5. If the battery is full, the massager can work continuously for around 60 minutes.
6. It is safe to use the massager while charging.
NOTE:
Attention ! Please only use provided charging adapter.
Heat Button
Press to activate the
Heat and the massager
shift to work on Mode
I , Press again to turn off
the Heat.
Note: There is no Heat
for Mode II.
Indicator light
3
Direction Button
Press to activate
Mode II, Press again to
shift to Mode I.