Introduction; Features - Peak PKC0J1200 Owner's Manual And Warranty Information

1200 peak amp jump-starter
Table of Contents

Advertisement

• Never allow battery acid to come in contact with this unit.
• All ON/OFF switches should be in the OFF position when charging the Jump-Starter or when not in
use. Make sure all switches are in the OFF position before connecting to a power source or load.
• Do not use any accessory that is not recommended or provided by the manufacturer.

INTRODUCTION

The 1200 Peak Amp Jump-Starter can supply DC power. It can be used to jump-start 12-volt DC
batteries. It also comes equipped with 2 USB power ports that will allow you to charge or power
devices. Each USB port will provide 2400 mA of output.
The Jump-Starter can provide 1200 peak amps when jump-starting a battery. It comes equipped with
heavy-duty, ergonomically designed clamps that require less effort to squeeze so they are easier to
clamp to the battery terminals. There is a worklight at the back of the unit that will illuminate the area
when you are attaching the clamps to the battery.
Pressing the Test/Alarm Button will display the jump starter internal battery status as well as the
Alarm - LCA Low Charge Alert
status. There are 5 green LED lights that display the battery's status.
®
When the button is pushed, if all 5 LEDs light up the unit is fully charged.
The Jump-Starter is equipped with Alarm - LCA Low Charge Alert
Test/Alarm button is lit, it indicates the LCA is activated. When the battery charge level is less than
5%, an alarm will sound to indicate the battery level is low and the unit should be charged. The alarm
can be "snoozed" for 24 hours by pressing the Test/Alarm Button. The alarm will automatically be
activated again in 24 hours if the battery has not been charged AND the Alarm - LCA Low Charge
Alert
®
feature has not been deactivated. There is a built-in storage area for the 110-volt AC charger.
This Jump-Starter has been carefully engineered and manufactured to give you dependable
operation. Please read this manual thoroughly before operating your new Jump-Starter, as it contains
the information you need to become familiar with its features and obtain the performance that will
bring you continued enjoyment for many years. Please keep this manual on file for future reference.

FEATURES

• Built-in 1200 peak amp battery Jump-Starter with quick-storing cables and ergonomic clamps
• 5 LED battery charge status display
• Two built-in USB power ports, 2400 mA each
• Built-in 5 LED worklight
• Includes sealed, maintenance-free, heavy-duty, lead-acid battery
• Requires no maintenance (other than recharging) for optimal operation
• Built-in 110/120-volt AC charging port and storage area
• Molded high-impact case is tough and durable
• Built-in ergonomic handle for easy carrying
• Alarm - LCA Low Charge Alert
®
with 24-hour snooze
. When the blue LED next to the
®
4

Advertisement

Table of Contents
loading

Table of Contents