Subscribe to Our Youtube Channel
Related Manuals for Peak PKC0AZ
Summary of Contents for Peak PKC0AZ
- Page 1 900 Peak Amp Jump-Starter Model No.: PKC0AZ Owner’s Manual and Warranty Information Read these instructions completely before using this product. Retain this Owner’s Manual for future reference. © 2014 3/14...
-
Page 2: Table Of Contents
CONTENTS SAFETY PRECAUTIONS ........................ 2 Jump-Starter Safety ........................ 2 Battery Jump-Starting Safety ....................2 INTRODUCTION ..........................4 FEATURES ............................4 OPERATION ............................ 5 Checking Jump-Starter Battery Status ..................5 Low Charge Alert (LCA) ......................5 Charging Jump-Starter Battery ....................5 Jump-Starting (Negative Ground Systems Only)..............5 DC Power Socket Operation.................... - Page 3 Do not smoke or use ammable items (matches, cigarette lighters, etc.) while working on a vehicle’s battery system. Never jump-start a frozen battery, as it could explode. Perform all jump-starting procedures in a safe, dry, well-ventilated area. Do not expose battery to re or intense heat since it can explode. Before recycling or disposing of a battery, protect exposed terminals with heavy-duty electrical tape to prevent shorting (shorting can result in personal injury or re).
-
Page 4: Introduction
Please keep this manual on le for future reference. FEATURES Built-in 900 peak amps battery jump-starter with quick storing cables and clamps Built-in 12-volt DC power socket for powering DC appliances Built-in USB power outlet... -
Page 5: Operation
OPERATION Checking Jump-Starter Battery Status Press and hold the battery status button, located on the front of the unit, to check the Jump-Starter battery charge level. The battery indicator display will indicate battery charge state as a percentage of the full battery capacity. Low Charge Alert (LCA) On the front of the unit there is a Low Charge Alert port. -
Page 6: Dc Power Socket Operation
EXPLOSION HAZARD Jump-start cable clamp connections at the vehicle’s battery terminals must be positive to positive (red clamp to battery “+”) and negative (black clamp) to the grounding point such as the metal frame of the vehicle. A reverse polarity connection (positive to negative) may cause damage to the unit and/or create a sparking/explosion hazard. -
Page 7: Worklight Operation
Worklight Operation Simply turn the worklight ON/OFF switch (on the front panel) to the ON position. The worklight will operate. Turn o when not in use. TROUBLESHOOTING Problem Situation Action Vehicle does not Improper cable clamp Rotate the cable clamps back and forth to make a start connections good connection. -
Page 8: Fcc Information
Manufacturer warrants to the original consumer, or purchaser, that the PEAK® 900 Peak Amp Jump-Starter PKC0AZ will be free from defects in material and workmanship for one year from the date of sale to the original purchaser. Manufacturer hereby excludes and disclaims any and all other warranties, expressed or implied, beyond those warranties speci ed above.
Need help?
Do you have a question about the PKC0AZ and is the answer not in the manual?
Questions and answers
Can I purchase a 120v ac adapter for this starter