Panasonic Quasar PVQ-1310 Service Manual page 94

To maintain original function and reliability of repaired units, use
only original replacement parts which are listed with their part
numbers in the parts list.
2. IMPORTANT SAFETY NOTICE
Components identified by the sign
important for safety. When replacing any of these components,
use only the specified parts.
3. SPECIAL NOTE
All integrated circuits and many other semiconductor devices are
electrostatically sensitive and therefore require the special
handling techniques described under the "ELECTROSTATICALLY
SENSITIVE (ES) DEVICES" section of this service manual.
4. Parts with no Ref. No. in "EXPLODED VIEWS" are not supplied.
And some Ref. No. will be skipped. Be sure to make your orders of
replacement parts according to the parts list.
5. Parts different in shape or size may be used. However, only
interchangeable parts will be supplied as service replacement
parts.
6. Parts with mark "MKA" in Remarks column are supplied from
MKA. Others are supplied from MKE.
12.1.2. Mechanical Replacement Notes
1. Section No. of parts shown in Exploded Views are indicated in the
Remarks column.
2. Main Cam Gear is supplied as a Main Cam Gear Kit (Ref. No. 8)
only. Main Cam Gear Kit consists of a Main Cam Gear and a Main
Cam Push Nut. However, Main Cam Push Nut is available
separately as a replacement part.
3. The Infrared Remote Control Unit (Ref. No. 123) replacement part
is available as a complete assembly unit only. Do not try to
disassemble the Infrared Remote Control Unit. However, the
battery cover is available separately as a replacement part.
4. Cut Washers (Ref. No. 470) are not reusable.
If removed, install a new one.
have special characteristics
94