Service Modes, Error Codes, And Fault Finding - Philips PICO 19HFL3232D/10 Service Manual

EN 14 5. TPM5.2E LA

5. Service Modes, Error Codes, and Fault Finding

Index of this chapter:
5.1 Service Modes
5.2 Service Tools
5.3 Software Upgrading
5.4 Error Codes
5.5 Fault Finding and Repair Tips
5.1 Service Modes
The Customer Service Mode (CSM) is used for communication
between the call centre and the customer, while the Service
Alignment Mode (SAM) offers several features for the service
technician.
This chassis also offers the option of using ComPair, a
hardware interface between a computer and the TV chassis. It
offers the abilities of structured troubleshooting, error code
reading, and software version read-out for all chassis.
5.1.1 Customer Service Mode (CSM)
Purpose
The Customer Service Mode shows error codes and
information on the TV's operation settings.The call centre can
instruct the customer (by telephone) to enter CSM in order to
identify the status of the set.This helps the call centre to
diagnose problems and failures in the TV set before making a
service call.
The CSM is a read-only mode; therefore, modifications are not
possible in this mode.
How to Activate CSM
Key in the code "123654" via the standard RC transmitter.
Note: Activation of the CSM is only possible if there is no (user)
menu on the screen!
Figure 5-1 CSM Menu 1
Figure 5-2 CSM Menu 2
2010-Jun-25
Service Modes, Error Codes, and Fault Finding
18840_200_100324.eps
100324
18840_201_100324.eps
100429
Figure 5-3 CSM Menu 3
How to Navigate
By means of the "CURSOR-DOWN/UP" knob (or the scroll
wheel) on the RC-transmitter, can be navigated through the
menus.
General
• 1.1 Set Type NVM read/write (max. 16 characters).
• 1.2 Production code NVM read/write (max. 16
characters).
• 1.3 Installation date Date the software was installed.
• 1.4 Option Code Store in NVM (set feature grouping as
option) panel code.
• 1.5 Codes Error code Layer 2. Store in NVM. 10 error
buffers: 000 = No problem, 011 = I
012 = tuner error, 013 = panel.
• 1.6 SSB 12NC NVM read/write (12 characters).
• 1.7 Display 12NC NVM read/write (12 characters).
• 1.8 PSU 12NC NVM read/write (12 characters).
• 2.1 Current Main SW Detects and displays software
version.
• 2.2 Stand-by SW Detects and displays software version.
2.3 SW version of other μP Detects and displays software
•
version.
• 2.4 Reserved Not applicable.
• 2.5 Reserved Not applicable.
• 2.6 NVM version Detects and displays software version.
• 3.1 Signal Quality/Present analog/digital signal strength.
• 3.2 Child lock Detects and displays.
• 3.3 HDCP keys Detects and displays.
• 3.4 CI slot present Detects and displays.
• 3.5 HDMI input format per Supported format. e.g.
576i 50 Hz, 576p 50 Hz, 720p 50 Hz, 1080i 50 Hz,
1080p 50 Hz.
• 3.6 HDMI audio format input stream Per supported
format e.g. Dolby TrueHD, DTS-HD Master Audio, MPCM.
• 3.7 HDMI video format input stream Per Supported
format. e.g. 576i 50 Hz, 576p 50 Hz, 720p 50 Hz,
1080i 50 Hz, 1080p 50 Hz
How to Exit CSM
Press "MENU" on the RC-transmitter.
18840_202_100324.eps
100428
2
C bus error,