Drum Light - LG DLE3400 Series Manual

OPERATION_DLE3600* / DLG3601* / DLEX4*00* / DLGX4*01* / DLEX4080* / DLGX4081*
Special Functions
Some cycle option buttons also activate secondary
functions. These special functions are marked with
an asterisk (*). Press and hold the option button
marked with the special function to activate it.
Control Lock
Use this option to prevent unwanted use of the
dryer or to keep cycle settings from being changed
while the dryer is operating.
Activating the Control Lock Function
Press and hold the below button(s) for 3
seconds.
• Damp Dry Signal ( DLEX4200*, DLGX4201*,
DLEX4000*, DLGX4001*, DLEX4500*,
DLGX4501*, DLEX4080*, DLGX4081*)
• Time Dry and Energy Saver
(DLE3600*,DLG3601*)
When the controls are locked, CL and the
remaining time are alternately shown on the
display during the dry cycle. All controls will be
disabled except the Power button.
Deactivating the Control Lock Function
Press and hold the below button(s) for 3
seconds.
• Damp Dry Signal (DLEX4200*, DLGX4201*,
DLEX4000*, DLGX4001*, DLEX4500*,
DLGX4501*, DLEX4080*, DLGX4081*)
• Time Dry and Energy Saver
(DLE3600*,DLG3601*)
Once set, Control Lock remains active until it is
manually deactivated. Control Lock must be turned
off to run another cycle.

Drum Light

(DLEX4200*, DLGX4201*,
DLEX4000*, DLGX4001*,
DLEX4500*, DLGX4501*,
DLEX4080*, DLGX4081*)
The drum is equipped with a blue LED that
illuminates when the dryer is turned on. This light
automatically turns off when the door is closed and
the cycle starts. To turn on the light during a cycle,
press and hold the Wrinkle Care button for three
seconds. The drum light will illuminate and then
turn off automatically after four minutes.
Steam Functions
(Steam Models)
LG's new steam technology injects fabrics with a
swirling jet of hot steam to refresh clothes, reduce
static, and make ironing easier.
Simply select the Steam Fresh™ or Steam
Sanitary™ cycle, or add a steam option to
selected cycles.
WARNING
To reduce the risk of serious injury, death,
explosion, or fire, follow basic safety
precautions, including the following:
• Do not open the dryer door during steam cycles.
• Do not touch the steam nozzle in the drum
during or after the steam cycle.
The Steam Sanitary™ Cycle
The Steam Sanitary™ cycle is ideal for sanitizing
non-washable items quickly and easily using the
power of steam.
Use this cycle for cotton and polyester material.
(Do NOT use for urethane foam, down feathers or
delicate items).
The Steam Fresh™ Cycle
Steam Fresh™ uses the power of steam to quickly
reduce wrinkles and odors in fabrics. It brings
new life to wrinkled clothes that have been stored
for an extended time and makes heavily wrinkled
clothes easier to iron. Steam Fresh™ can also be
used to help reduce odors in fabrics.
NOTE
• The cycle time depends on the load (number
of items). Press the More Time or Less
Time button to change the display to reflect
the number of items in the load. The display
will show 1, 3, 5 or
items, 5 is for 4 or 5 items, and
a large load such as a comforter.
Using the Steam Fresh™ Cycle
1
Turn on the dryer and turn the cycle selector
knob to select the Steam Fresh™ cycle.
2
To add an option, select Wrinkle Care.
3
The display shows the load size (number of
items). Change the steam time by pressing
the More Time or Less Time buttons to fit
the size of the load.
4
Press Start/Pause to start the cycle.
33
. 3 means 3 or fewer
indicates