Signal; Prewash; Rinse+Spin; Drum Light - LG WM8100H A Series Owner's Manual

26
OPERATION

Signal

The washing machine plays a melody when the
wash cycle is finished. The buttons make a sound
each time a button is pressed. Use this option to
adjust the volume of the melody and button tones.
A
1
Press .
B
2
Turn to the desired cycle.
3
Press . Adjust the melody and button tones
as desired.
4
Press the desired option to use the other options.
C
5
Press .

Prewash

Prewash for 15 minutes when clothes are covered in
dirt or dust. This feature is suitable for heavily soiled
items.
B
A
1
Press and turn
2
Press .
- light will turn on.
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
C
4
Press .

Rinse+Spin

Use this cycle to rinse detergent from load.
B
A
1
Press and turn
2
Press .
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
C
4
Press .
to the desired cycle.
to the desired cycle.

Drum Light

The drum is equipped with a white LED light that
illuminates when the washer is turned on. This light
automatically turns off when the door is closed and
the cycle starts. To turn on the light during a cycle.
B
A
1
Press and turn
C
2
Press .
3
Press and hold
wash cycle.
- The drum light will illuminate and then turn off
automatically after 4 minutes.
- Clothes and the gasket may look like yellow due
to lights of the lamp, but it is normal.

Fresh Care

Use this function when you are not able to take out
your clothes as soon as the wash cycle ends.
This function provides periodic tumbling for up to
about 19 hours to prevent wrinkles. Press the Start/
Pause or Power button to unload laundry at any
time.
B
A
1
Press and turn
2
Press and hold
wash cycle.
- light will turn on.
3
Select any desired options.
- Skip to step 4 if you would like to use the default
settings without changing or adding any options.
C
4
Press .

Extra Rinse

You can add an extra rinse cycle to the default rinse
cycle.
B
A
1
Press and turn
2
Press .
- light will turn on.
3
Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
C
4
Press .
to the desired cycle.
for 3 seconds during the
to the desired cycle.
for 3 seconds during the
to the desired cycle.