Advertisement
camera operation
y ViDEo analYTiCs
If the SPECIAL menu screen is
➊
displayed, use the Function Setup
switch so that the arrow indicates
'VIDEO ANALYTICS'.
Select a desired mode using the
2
Function Setup switch.
- TAMPERING : If the screen view
y SENSITIVITY : Set the sensitivity to tampering detection.
y ALARM OUT : Outputting of detection signals can be set.
EXTERNAL : Send signals through external terminals.
`
OSD : Display signals on the screen.
`
RETURN : Return to the TAMPERING menu.
`
y RETURN : Return to the VIDEO ANALYTICS menu.
M
`
In the following cases, the initially set tampering detection function can malfunction.
- In a monitoring environment with a simple background or an environment with low light level or at
night, the detection performance can deteriorate.
- Sudden changes in the lighting and severe camera shaking can be wrongly detected as tampering.
- Immediately after tampering, the camera tampering detection can take up to a max of five seconds.
- If camera tampering is detected, after some time(five sec), stabilization will be done before
restarting. During stabilization, there is no detection.
- MOTION : This product
y DET. SIZE : Selects an object size to detect on the screen.
28_ camera operation
is obstructed or the
camera location
is changed,
tampering
detection, you can
issue an event signal by setting it.
generates signals
each time an object
movement is detected
in the four areas of
the screen so efficient
monitoring can be
achieved.
VIDEO ANALYTICS
1. TAMPERING
2. MOTION
3. INTELLIGENCE
RETURN
4.
TAMPERING
SENSITIVITY
1.
ALARM OUT
2.
RETURN
3.
MOTION DET
DET. SIZE
1.
DET. AREA
2.
NON DET. AREA
3.
4. INDICATOR
ALARM OUT
5.
RETURN
6.
OFF
OFF
OFF
MIDDLE
OFF
Advertisement
