Advertisement
- FONT COLOR : You can change the OSD font color. (White, Yellow, Green, Red, Blue)
- LANGUAGE : You can select the menu language according to your requirements.
- RETURN : Return to the SPECIAL menu.
y Comm aDj (Communication adjustment) :
- COAX : You can select whether to
use COAX communication.
- RETURN : Return to the SPECIAL
menu.
y imagE aDj
If the SPECIAL menu screen is
➊
displayed, use the Function Setup
switch so that the arrow indicates
'IMAGE ADJ'.
Select a desired mode using the
2
Function Setup switch.
- GAMMA :
The setting range is 0.2 ~ 1.0. The
closer to 1.0 the setting is, the
darker it gets.
→0.20, 0.25, 0.30, 0.35, 0.40, 0.45,
0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95, 1.0
- PED LEVEL : The setting range is 1 ~ 100. The closer to 100 the setting is, the higher
- COLOR GAIN : The setting range is 1 ~ 100. The smaller the setting value is the
- H-REV : Flip an image horizontally.
- V-REV : Flip an image vertically.
- D-ZOOM : You can use a digital zoom of x1 ~ x16.
- SHARPNESS : Select a mode to adjust the thickness of an image's sharpness.
- PFR : Purple fringe can be reduced.
- RETURN : Return to the SPECIAL menu.
M
`
When the V-REV or H-REV mode is enabled, the text on the screen does not fl ip.
`
If you increase the SHARPNESS level too high, the picture may become distorted or noise may appear.
`
When you use the PFR function, if there is an object near the strong light, the color can be missing.
the PED level gets.
smaller the color gain gets and the more color blind it gets.
Increase or decrease the level of each mode to adjust the level of
sharpness. Depending on the image, adjust it to an appropriate value.
(OFF/LOW/MIDDLE/HIGH)
COMM SETUP
1. COAX
RETURN
2.
IMAGE SETUP
GAMMA
1.
PED LEVEL
2.
COLOR GAIN
3.
4. H-REV
5. V-REV
6. D-ZOOM
7. SHARPNESS
8. PFR
RETURN
9.
ON
0.45
50
----
----
50
----
----
OFF
OFF
OFF
MIDDLE
OFF
English_25
Advertisement
