2. Hardware Features & Specifications
2.1 Overview
UnaBell LTE-M is a battery powered
smart button that can be configured to
send messages and trigger actions for a
variety of applications. The device is IP54
for dust and water protection and can last
at least 2,000 clicks with two replaceable
AA batteries.
Additionally, plug-and-play accessories
such as reed switch or temperature probe
may also be purchased. These can be plugged to the UnaBell LTE-M via 3.5mm
audio jack connectors and be used to detect the opening/closing of doors or
measure ambient temperature of a space, respectively.
Seamlessly integrated with UnaConnect, a secure and reliable IoT Device
Management Cloud Platform, UnaBell LTE-M and its optional accessories can be
quickly and easily configured and installed to provide the trigger messages or
temperature data for your use cases.
2.2 Features
Minimum 2,000 clicks with replaceable AA batteries
●
IP54 for dust and water protection
●
eSIM or Plastic SIM can be used based on your local network provider
●
UnaConnect Compatible: UnaBell LTE-M sends data through the LTE network
●
and is received by the UnaConnect IoT Middleware for data parsing, enrichment
and connection to end points
Firmware Over-the-Air (FOTA) via LTE-M network to update device firmware
●
4 Click Types to configure the trigger messages from the device
●
Battery Monitoring in Heartbeat Messages to monitor device health
●
Accessories with 3.5mm Audio Jack (purchased separately):
●
o Reed Switch Accessory to detect opening/closing of doors
o Temperature Probe Accessory to measure ambient temperature of a space
o 2-Wire Accessory to connect with other sensors (e.g. pressure sensor)
UnaBell LTE-M User Guide
3