1.
Introduction
1.1 About this Guide
The purpose of this guide is to provide quick start instructions and information on
setting up and using UnaBell LTE-M to receive data for your applications.
The quick start instructions for the UnaBell LTE-M solution include:
● Device activation and installation
● Device configuration and data visualization with the fully integrated UnaConnect
IoT Device Management Cloud Platform
● Device Firmware Over-the-Air (FOTA) update with the UnaConnect platform
1.2 Glossary
Uplink or UL
Downlink or DL
Timer Mode
Event Mode
Heartbeat Mode
Occupancy
Mode
An uplink message is a message sent by the device to the cloud
A downlink message is a message sent by the cloud to the device
Device counts the number of clicks detected and sends the count in an
uplink message at pre-configured intervals
Device immediately send an uplink message when a click is pressed by
the user
The heartbeat mode can be selected along with Event or Occupancy
modes. A heartbeat message is sent periodically by the device to inform
the user on battery life, changes in configuration etc.
Device sends an uplink message as it identifies the state has changed
between Open or Closed States
UnaBell LTE-M User Guide
1