MSI MEG X670E GODLIKE User Manual page 45

9. Connect the PCIE_PWR1 to the power supply.
10. Connect the HDD LED cable supplied with your case to the JCASE connector.
11. Use the HDD LED cable supplied with M.2 Xpander-Z Gen 5 Dual card to connect
the JMB connector and JFP1's HDD pins (pin 1 & pin3).
12. Use the JSMB cable supplied with this card to connect the JSMB connector and
JSMB1 connector. And then you can set the fan duty cycle and the M.2 temperature
LED color in BIOS.
9 9
PCIE_PWR1
JCASE
JMB
+
+
JSMB
43
10 10
JFP1
11 11
+ -
HDD LED
12 12
JSMB1