MSI MEG X670E GODLIKE User Manual page 20

Internal USB
Connectors
Fan Connectors
System Connectors
Button
Switch
Jumpers
LED Features
Continued from previous column
∙ 1x USB 3.2 Gen 2x2 20Gbps Type-C front panel connector*
(From X670 chipset)
• Supports USB PD 60W fast charging**
∙ 1x USB 3.2 Gen 2 10Gbps Type-C front panel connector
(From X670 chipset)
∙ 2x USB 3.2 Gen 1 5Gbps connectors (From X670 chipset)
• Supports additional 4 USB 3.2 Gen 1 5Gbps ports
∙ 2x USB 2.0 Type-A connectors (From X670 chipset)
• Supports additional 4 USB 2.0 ports
* JUSB2 doesn't support USB 2.0 device.
** To achieve USB PD 60W charging for JUSB2, PD_PWR1 connector needs to be
connected to the power supply unit.
∙ 1x 4-pin CPU fan connector
∙ 2x 4-pin water-pump fan connectors
∙ 6x 4-pin system fan connectors
∙ 1x Front panel audio connector
∙ 2x System panel connectors
∙ 1x Chassis intrusion connector
∙ 1x 3-pin Water flow connector
∙ 2x 2-pin Thermal sensor connectors
∙ 1x Tuning controller connector
∙ 1x Power button
∙ 1x Reset button
∙ 1x EZ LED Control switch
∙ 1x Multi-BIOS switch
∙ 1x M-VISION switch
∙ 1x Clear CMOS jumper
∙ 1x Low temperature booting jumper
∙ 1x OC safe boot jumper
∙ 1x 4-pin RGB LED connector
∙ 3x 3-pin A-RAINBOW V2 (ARGB Gen2) LED connectors
∙ 4x EZ Debug LED
∙ 1x 2-Digit Debug Code LED
Continued on next column
18