Mueller H-605 Operating Instructions

o p e r a T i n g i n s T r u C T i o n s
Mueller H-605 Air Power Operator
®
GenerAl
This publication addresses some of the safety issues when operating this machine. Neglecting to follow these recommendations
may pose serious hazards or result in failure of equipment. The operator of this machine must have access to, have read, and fully
understand this document and the recommendations and operating instructions for the H-605 Air Power Operator.
The H-605 Air Power Operator provides air power to drive various Mueller
catalog for machine compatibility.
!
warning: The operator of this machine must adhere to the following instructions to reduce the possibility of misuse
of the machine or accident. Failure to observe these instructions and the following warnings could result in serious
bodily injury.
always wear eye protection when operating this machine.
Do noT use damaged, frayed, loose or deteriorated air hoses or fittings.
always turn off the air supply and disconnect the air supply hose before installing, removing or adjusting any accessory
on this machine, or before performing maintenance on this machine.
!
CauTion: Do noT modify this machine. Doing so could void the warranty and create a safety hazard.
Reliable Connections
TM
sPeciFicAtiOns FOr H-605 Air POWer OPerAtOr
• Weight (Operator Only) – 15 lbs. (6.8 kg)
• Length – 19" (48 cm)
• Width – 3.5" (9 cm)
• Height – 3.5" (9 cm)
1. OPerAtinG instructiOns
!
CauTion: pneumatically driven
power tools are not generally
insulated against coming in contact
with sources of electrical current.
Take necessary precautions if
sources of electrical current are
nearby.
!
warning: operate this machine
at 90psig (6.2 bar/621kpa) air
pressure.
Water (U.S.) Water (Canada)
1.800.423.1323 1.705.719.9965
www.muellercompany.com www.muellercanada.com
moreinfo@muellercompany.com more-info@muellercanada.com
Drilling Machines. Refer to current Mueller product
®
• Air Consumption – 36 scfm at max
power (1m
• Free Speed – 52 rpm
• Operation – Non-reversible
a. Be sure to read the Mueller Operating
Instructions for the Mueller drilling
machine that is being powered by the
H-605 operator.
B. Install drilling machine on pipe
according to the drilling machine's
operating manual.
C. After the drill or pilot has been
positioned at the pipe according to
the machine instructions, attach the
operator to the machine.
Gas (North America)
1.800.798.3131
www.muellergas.com
moreinfo@muellercompany.com
/min)
3
International
1.423.490.9555
www.mueller-international.com
international@muellercompany.com