Advertisement
HG-8
Warm Climate
Flushing System
!
WARNING:
1. Read and follow instructions carefully. Proper training and periodic review
regarding the use of this equipment is essential to prevent possible serious injury
and/or property damage. The instructions contained herein were developed for
using this equipment on fittings manufactured by Mueller Co. only, and may not be
applicable for any other use.
2. DO NOT exceed the pressure ratings of any components or equipment. Exceeding
the rated pressure may result in serious injury and/or property damage.
3. Safety goggles and other appropriate protective gear should be used. Failure to do
so could result in serious injury.
F 13827 2/21
OPERATING INSTRUCTIONS MANUAL
TABLE OF CONTENTS
Assembly, Disassembly, &
Maintenance Instructions
PAGE
2 - 3
3 - 4
5
6
7
8
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Mueller HYDRO-GUARD HG-8
Summary of Contents for Mueller HYDRO-GUARD HG-8
- Page 1 The instructions contained herein were developed for using this equipment on fittings manufactured by Mueller Co. only, and may not be applicable for any other use.
- Page 2 Please read and retain this should be reviewed. The drainage manual. It will be helpful for pattern must permit discharged water The Hydro-Guard HG-8 Warm Climate future reference, training, to flow away from the Hydro-Guard Unit, is the industry’s only Sub- troubleshooting, and maintenance.
-
Page 3: Installation Instructions Programming Unit
HG-8 WARM CLIMATE FLUSHING SYSTEM Installation Instructions & Programming Unit INSTALLATION - (CONTINUED) 6. Install the top of the meter disturb the connection to the pit Automatic Flushing Device in box level with existing grade and and possibly overtightened the accordance with the utility’s policy. - Page 4 HG-8 WARM CLIMATE FLUSHING SYSTEM Programming Unit 1. The App will now search for devices in range. 2. Choose the Controller. The serial numbers that populate the device list can be found on the label located on the back of the controller housing with the designation “Default name.”...
- Page 5 Disassembly / Reassembly Instructions HG-8 DISASSEMBLY AND REASSEMBLY INSTRUCTIONS TOOLS NEEDED: Philips screwdriver, flat-head screwdriver, HG-20087 T-handle wrench WARNING: Avoid overuse of Although the Hydro-Guard HG-8 4. To prevent the loss of the pipe sealant and never allow Warm Climate Sub-Surface...
-
Page 6: Troubleshooting
HG-8 WARM CLIMATE FLUSHING SYSTEM Troubleshooting TROUBLESHOOTING THE PROGRAMMER PROBLEM CAUSE SOLUTION Controller does not flush Water at main water supply is Check main supply valve as desired shut off Battery dead Replace battery Controller set to OFF Set controller to desired program Controller improperly programmed Check program and clock settings Blank display... -
Page 7: Upgrades & Battery Replacement
Flush Management main-line water quality is being sampled. Generally a two-minute The Hydro-Guard HG-8 can not be flush is sufficient. Track your upgraded to S.M.A.R.T. technology. residual levels and alter flushing To monitor water quality, conditioned... -
Page 8: Parts
Please see muellerwp.com/brands and krauszusa.com to learn more. © 2021 Mueller Water Products, Inc. All Rights Reserved. The trademarks, logos and service marks displayed in this document are the property of Mueller Water Products, Inc., its affiliates or other third parties. Products marked with a section symbol (§) are subject to patents or patent applications. For details, visit www.mwppat.com. These products are intended for use in potable...
Need help?
Do you have a question about the HYDRO-GUARD HG-8 and is the answer not in the manual?
Questions and answers