Important safety instructions Warning • Use only the batteries listed in the user instructions. • Do not allow the product to come into contact with • The Electrical network is classified as hazardous. The liquids. only way to power down the charger is to unplug the • Risk of explosion if battery is replaced by an incorrect power supply from the electrical outlet.
Page 3
Overview Earpiece Display icons Loudspeaker (back of the handset) Microphone Find handset In call Display icons Phonebook The number of bars indicates the connection Access the redial list. status between the handset and base station. The more bars are shown, the better the signal Increase the volume.
Get started Configure your phone Charge your phone 1 The batteries are pre-installed in the handset. Pull the battery tape off from the battery door before charging. Charge 8 hours 2 When using your phone for the first time, you see a welcome message (country dependent).
Page 6
2 Follow on-screen instructions. 1 Press . Telephone answering machine 2 Select a record and press (for M555 only) Direct access memory You have 2 direct access memories (Keys 1 and 2). Record an announcement To dial the saved phone number automatically, press 1 Press >...
Technical data Battery • Philips: 2 x AAA NiMH 1.2V Rechargeable 550mAh batteries Use only the supplied batteries. Adapter Base and charger: • Philips: S003EB06000302: Input: 100-240V~ 50/60Hz 0.2A; Output: (i)6Vdc 0.3A, (ii)6Vdc 0.2A Phonebook with 100 entries Call log with 50 entries...
Frequently asked questions No signal bar is displayed on the screen. The handset on the charger does not charge. • The handset is out of range. Move it closer to the • Make sure the batteries are inserted correctly. base station. • Make sure the handset is placed properly on the • If the handset displays [Register your handset], charger.
Page 9
For information, refer to the extended user documentation online.