First Use; Using The Oven - Smeg SO610S3PS Manual

First use

If the time is not set, the oven will not
switch on.
On the first use, or after a long power failure,
and the
appliance display. To be able to start any
cooking function, the current time must be set.
Time setting
1. Press the button.
2. Turn the temperature knob to select the time
format to display (
When the version
the display shows
(afternoon).
3. Press the button to confirm the
modification and go on to adjust the time.
4. Turn the temperature knob to set the current
time.
5. Press the button to set the current time
and go to the selection of minutes.
6. Turn the temperature knob to select the
minutes of the current time.
7. Press the button to confirm.
It may become necessary to change the
current time, for example for daylight
saving time.
When the current time is visible, after 2
minutes from the last knob operation it is
displayed with low brightness.
66 - USE
button flash on the
or
is selected,
(morning) or
To cancel the operation, turn the
function knob or hold down the button
Modifying the time
1. In the main menu, hold down the
for a few seconds.
2. Modify the time as described in point 2 in
the previous chapter.

Using the oven

See General safety instructions.
).
Steam cooking
If cooking has just been performed with
temperatures greater than 100°C, you
must wait for the oven to cool in order to
use the steam function.
1. Turn the knob to the steam cooking function
+
flashes.
Reservoir filling
2. Open the door and pull the loading drawer
out of its housing.
for a few seconds.
. The indicator light
91477A665/A
button