Siemens SBA 800 Information And Instruction Manual page 2

Circuit breaker indicators shown in this booklet are for illustration purposes only. Circuit
breakers are to be installed in "Discharged" and "Open" positions only.
The information contained herein is general in nature and not intended for specific
application purposes. It does not relieve the user of responsibility to use sound practices
in application, installation, operation, and maintenance of the equipment purchased.
Siemens reserves the right to make changes in the specifications shown herein or to
make improvements at any time without notice or obligations. Should a conflict arise
between the general information contained in this publication and the contents of
drawings or supplementary material or both, the latter shall take precedence.
*Authorized and qualified personnel—
For the purpose of this manual a qualified person is one who is familiar with the installation,
construction or operation of the equipment and the hazards involved. In addition, he has
the following qualifications:
(a) is trained and authorized to de-energize, clear, ground, and tag circuits and
equipment in accordance with established safety practices.
(b) is trained in the proper care and use of protective equipment such as rubber gloves,
hard hat, safety glasses or face shields, flash clothing, etc., in accordance with
established safety practices.
(c) is trained in rendering first aid.
These instructions do not purport to cover all details or variations in equipment, nor to
provide for every possible contingency to be met in connection with installation,
operation, or maintenance. Should further information be desired or should particular
problems arise which are not covered sufficiently for the purchaser's purposes, the
matter should be referred to the local sales office, listed on back of this instruction guide.
The contents of this instruction manual should not become part of or modify any prior
or existing agreement, commitment or relationship. The sales contract contains the entire
obligation of Siemens Energy & Automation, Inc. The warranty contained in the contract
between the parties is the sole warranty of Siemens Energy & Automation, Inc. Any
statements contained herein do not create new warranties or modify the existing
warranty.
Courtesy of NationalSwitchgear.com
IMPORTANT
NOTE
SUMMARY