7� Electrical Connections - gefran HMF Series Instruction Manual

The interface to controller is:
- a multi-polar cable outlet with conduit output type ½ 14-NPT as illustrated in Fig. 7.1..
where are also pointed out the connections (2 wires connection current amplified). In the case of relay
output with retransmitted output in current (2 wires) the connections are shown in Fig. 7.2.
CURRENT OUTPUT (NO RELAY)
The cable shield is tied to both sides, i.e. to the sensor connector and to the controller
Cable outlet (1/2 14-NPT) L = 1 m
Current output
14
7� Electrical Connections
Fig� 7�1�
Fig� 7�2�
80636B_MAN_HMF - HWF_05-2022_ENG