Advertisement

FITTING INSTRUCTIONS
It is recommended that only a properly qualified person installs the product and carries out maintenance. If you are not
qualified and attempt to carry out such work ensure that all safety equipment is used and safety standards are met.
Ensure that you have read the full Product Manual before attempting to fit the product.
Ensure the Product Manual is kept with the vehicle and that any vehicle owner and/or operator are fully advised on the
system and its operation before attempting to drive or operate it.
DO NOT connect any electrical components to the vehicle without preparing the electrical system as per the vehicle
manufacturer's instructions. Connecting without preparing the vehicle could lead to component failure, vehicle damage
or fire.
If you use a sharp utility knife or razor blade great care must be taken in all cases not to cut yourself during this operation.
Air compressors get hot - avoid any flammable liquid or burn risk areas.
The air tank is rated to a maximum working pressure of 150 psi (10 bar) and this is never to be exceeded.
Incorrect
use
of
and/or the vehicle, which is not covered under warranty.
Ensure suspension airbags are maintained at the stated ride height at all times and maintain the minimum pressure
required and never exceed the maximum, as required by the particular airbag product.

AIR CONNECTIONS

WAC8112INS V1 05/08/16 JE LH
this
product
can
result
in
damage
to
the
E&OE Copyright © 2016 RKC Holdings Pty Ltd
AC8112
components
associated
parts

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AC8112 and is the answer not in the manual?

Questions and answers

Summary of Contents for RKC INSTRUMENT AC8112

  • Page 1 FITTING INSTRUCTIONS AC8112 It is recommended that only a properly qualified person installs the product and carries out maintenance. If you are not qualified and attempt to carry out such work ensure that all safety equipment is used and safety standards are met.
  • Page 2 ELECTRICAL CONNECTIONS GENERAL ADVICE AIRLINE TUBING & FITTINGS - GENERAL NOTES CUT TUBING SQUARE WITH CUTTING SHARP BLADE Only cut the airline tubing with a sharp blade making the cut as square as OR TUBE possible. CUTTER Always trim the tubing before re-inserting into the fitting. If you use a sharp utility knife or razor blade great care must be taken in all cases not to cut yourself during this operation.
  • Page 3 STEP 2 – POSITION AIR COMPRESSORS MOUNTING LOCATION Select a mounting position considering the following: Mounting surface needs to be Flat, Rigid and Secure (preferably horizontal). As close to the Battery as possible. It is better to use more air line tubing than more electrical wiring as longer runs of wiring require heavier wiring to maintain voltage.
  • Page 4 Air filter condition is directly related to compressor location, driving environment and compressor usage. For high debris applications inspect the air filter every month. STEP 5 – COMPRESSORS WIRING AND AIRLINE CONNECTION Use the supplied Air and Electrical Connections diagrams as a guide for your dual compressor air line and wiring connections. Use the instructions supplied with your Airbag Man Air Control system kit for specific air line and wiring connections.

Table of Contents