Advertisement
Available languages
Available languages
If the plug or cord requires
l
replacing a new cord set should
be fitted by an Authorised
Kenwood Repairer.
WARNING: THIS APPLIANCE
l
MUST BE EARTHED.
Note:
For non-rewireable plugs the
l
fuse cover MUST be refitted
when replacing the fuse. If
the fuse cover is lost then the
plug must not be used until a
replacement can be obtained.
The correct fuse cover is
identified by colour and a
replacement may be obtained
from your Kenwood Authorised
Repairer (see Service).
If a non-rewireable plug is cut
l
off it must be DESTROYED
IMMEDIATELY. An electric
shock hazard may arise if an
unwanted non-rewireable plug
is inadvertently inserted into a
13A socket outlet.
This appliance conforms to
l
EC Regulation 1935/2004 on
materials and articles intended
to come into contact with food.
before using for the first time
(A) - Clip excess cord into the
l
cord storage clips in the base
.
8
Operate the toaster once on
l
a medium setting without
bread. (The lever will not stay
down unless the toaster is
plugged in).
As with all new heating
l
elements, your toaster may emit
a slight burning smell when it is
first switched on. This is normal
and not a cause for concern.
English
key
removable warming rack (if
1
supplied)
carriage lever (with
2
'Hi-Rise™' for extra lift)
browning control
3
cancel button with
4
indicator light
defrost button with
5
indicator light
bagel button with indicator
6
light
crumb tray
7
cord storage
8
to use your toaster
1 Plug the toaster into the
power supply.
2 Turn the browning control until
the desired setting aligns with
the line up mark on the body of
the toaster. Use a lower setting
for light toasting and for thin or
dry bread.
3 Insert the bread, muffins,
bagels etc.
4 Lower the lever
(The lever will not stay down
unless the toaster is plugged
in). The 'cancel'
will illuminate.
5 Your toast will pop up
automatically, to raise it higher,
lift the lever.
5
until it locks.
2
button
Advertisement
