Advertisement
BEFORE FIRST USE:
The Auto-Darkening welding helmet needs to be charged prior to use and
after extended storage. Face the solar cell on the helmet toward sun light or
light bulb for at least 1 hour before use.
HEADGEAR ADjUSTMENT:
A D J U S T M E N T
P I N H O L E S F O R
A D J U S T M E N T
T I L T A D J U S T M E N T
R A T C H E T K N O B
C R O W N
PIN HOLES FOR
ADJUSTMENT
Headband tightness is adjusted by pushing in the ratchet knob and turning to
adjust to desired comfort level. This knob is located at the back of the hel-
met. HEAD GEAR CROWN ADjUSTMENT is made by adjusting crown
strap for vertical placement on the head and snapping the pin into the hole to
lock securely in place.
Tilt: Tilt is adjusted on the left side of the helmet. TILT is adjusted by loos-
ening outside tension knob and releasing the adjustment lever from its cur-
rent location and moving it to another location. Retighten the outside tension
knob when finished.
OPERATING INSTRUCTIONS
WARNING
TILT ADJUSTMENT
CROWN
ADJUSTMENT
3
RATCHET KNOB
Advertisement
